您好,歡迎訪問無錫【家佳旺】搬家公司!公司常備大中小型各類貨車,在無錫地區承接廠房搬家,公司搬遷,長途搬家,居民搬家等服務!

無錫搬家公司

專業服務 放心托付!

搬家收費標準

價格合理 無亂收費!

全國咨詢熱線

0510-83110898

無錫【家佳旺】搬家公司

無錫搬家公司對空調拆裝步驟有哪些?

發布時間:2019-08-29人氣:78

現代家庭,空調是必備的家用電器,所以搬家時是個不能忽視的問題。一般情況下,空調使用年限較長,我們是不建議搬家時搬運空調的,因為,拆裝空調會影響空調的使用壽命的,而且,在拆裝空調的過程中也會產生額外的費用。如果,客戶有需求的話,我們是可以提供空調拆裝服務的,無錫搬家公司有簽約的專業空調拆裝人員,可以,保證空調拆裝后不受影響的正常使用。

In modern families, air conditioning is a necessary household appliances, so moving is a problem that can not be ignored. Generally speaking, air conditioning has a long service life. We do not recommend moving air conditioning, because disassembly and assembly of air conditioning will affect the service life of air conditioning, and there will be additional costs in the process of disassembly and assembly of air conditioning. If the customer needs, we can provide air conditioning disassembly and assembly services. Wuxi Moving Company has contracted professional air conditioning disassembly and assembly personnel, which can ensure the normal use of air conditioning unaffected after disassembly and assembly. 無錫搬家公司拆裝空調步驟:

Dismantling and assembling air conditioning steps of Wuxi Moving Company:

拆機:

Dismantling machine:

1、收氟 開機打制冷,壓縮機工作后關閉高壓閥運轉一分鐘,關閉低壓閥,停機。拔掉電源插頭(切記)。

1. Receive fluorine and start refrigeration. After the compressor works, close the high-pressure valve and run for one minute. Close the low-pressure valve and stop the machine. Pull out the power plug (remember).

2、拆開室外機銅管接頭,拆開室外機電線接頭(記住線的順序)。

2. Remove the copper pipe connector of the outdoor machine and the electrical wire connector of the outdoor machine (remember the sequence of the wires).

3、拆下室內室外機。

3. Remove the indoor and outdoor machines.


裝機:

Installation:

1、在預定位置釘好室內機的掛盤(必須保證水平),將管穿出后掛好室內機。

1. Hanging tray of indoor machine should be nailed in pre-positioning position (level must be guaranteed). Hang indoor machine after pipe is put through.

2、根據管的長度確定室外機的位置,室外機也要保證水平。

2. Determine the location of outdoor machine according to the length of pipe, and ensure the level of outdoor machine.

3、接好高低壓管,先打開高壓閥,然后松低壓管鎖母(排出管路中的空氣),聽到有出氣的聲音8~10秒后擰緊該鎖母,打開低壓閥,按順序接好電線。

3. Connect the high and low pressure pipe, first open the high pressure valve, then loosen the low pressure pipe lock mother (discharging the air in the pipeline). After hearing the sound of exhaust for 8-10 seconds, tighten the lock mother, open the low pressure valve, and connect the wires in sequence.

4、接通電源,試機。檢查管路接頭(鎖母處)有無泄漏。

4. Connect the power supply and test the machine. Check whether there is leakage in pipe joint (lock mother).

注意事項:舊空調的銅管韌性較差,容易撾成死彎。

Notes: Copper tubes of old air conditioners have poor toughness and are easy to bend in Laos.

辛苦整理!轉載請注明來自 http://www.928106.tw/show.asp?id=163

你覺得這篇文章怎么樣?

0 0
網友評論

管理員

該內容暫無評論

美國網友

推薦資訊

快乐双彩39期开奖结果